Revolution Gear Axle Rebuild Kit Toyota FJ Cruiser 4.0 V6 2007-09 Ring and Pinion Bearings Seals Choice of Ratios
from £1,295.00 inc VAT
Choose your options to earn 1 point per £1 spent!
Revolution Gear Axle Rebuild Kit Toyota FJ Cruiser 4.0 V6 2007-09 Ring and Pinion Bearings Seals Choice of Ratios
We do not ship this product to your location
Find out more about our loyalty schemefrom £1,295.00 inc VAT
Choose your options to earn 1 point per £1 spent!Complete diff rebuild kit with a choice of drive ratios.
Brand: Revolution Gear (click for brand info)
Availability: Usually 2 weeks, some kits are quicker
Free UK Shipping
Credit available
Expert pre-sales advice
Contact usRevolution Gear are a high-end American brand, offering quality rebuild kits for a wide rainge of 4WD models and pickups.
Model: Toyota FJ Cruiser 4.0 V6 – 2007-09
Years Covered: 2007 – 2008 – 2009
Kit Type: Sold as a complete front and rear rebuild kit
Notes: Be sure to confirm which diffs your vehicle has before ordering, ask us for help if needed
The product images show a typical kit, actual kit contents will vary to suit your specific model.
Kits include Front and Rear Ring and Pinion Gear Sets and Master Overhaul Kits with top quality Timken or Koyo Bearings and National seals. Also included are Pinion Shims, Carrier Shims, Pinion Nut, Gasket or Sealant, Preload Shims or Crush Sleeve, Ring Gear, Bolts, Gear Marking Compound and Loctite.
When overhauling your diff or changing axle ratios to account for larger wheels and tyres, it is critical that high quality components are used throughout. If low grade parts are used, there is a high chance that a further rebuild could be required within a few months to replace these components. When driving off-road or carrying heavy loads, increased stresses are added to the drivetrain and weaker components become increasingly prone to failure.
Revolution Gear and Axle are a long-established American brand, and are highly regarded in the US off-road market. Every component in their kits is durable and built to last, whether on the trail or being used on the highway. Revolution Gear kits are race-proven and are a popular upgrade when needing to re-gear your diffs to account for the increased rolling radius of larger tyres. With a wide range of fitment options and a selection of ratios to choose from, you can depend on Revolution Gear products.
- Choice of ratios (most models)
- Regain fuel economy and power
- Reduced drivetrain wear
- Shims, nuts and bolts supplied where required
- Race tested quality
- 2 year limited warranty
“Will this kit fit my car without modification?”
Yes, this kit is designed to fit standard axles and diffs.
“What are the benefits of re-axle or diff gearing?”
When larger wheels and tyres are fitted, the rolling radius of the wheels is increased. This means that the engine has to rev harder to achieve the same amount of movement as before, which uses more fuel and puts more strain on the drivetrain. It also makes the vehicle slower!
“Are all required parts included?”
Yes, this is an extensive kit with all seals, bearings and other parts needed for a standard overhaul.
“Do I really need to replace my bearings and seals when changing my crownwheel and pinion set?”
Whilst you don’t absolutely have to replace these parts, it does not really make sense to strip down the diff just to reassemble it with old, worn parts. Your axle will run more quietly and more efficiently with new parts, plus it will last a long time.
“Is this product suitable for both on and off-road use?”
Yes, this product is suitable for on and off road use, including commercial users and towing.
This item ships for free within the UK and EU. Shipping charges may apply to other locations.
