Old Man Emu OME Torsion Bars Isuzu D-Max 2002-12
£279.00 inc VAT
Earn 1 loyalty point per £1 spent!
Old Man Emu OME Torsion Bars Isuzu D-Max 2002-12
Free UK ShippingWe do not ship this product to your location
£279.00 inc VAT
Earn 1 loyalty point per £1 spent! Find out more about our loyalty schemeOME torsion bars dramatically improve your vehicle’s ride and handling, both on road and off.
Brand: Old Man Emu (click for brand info)
Availability: Usually in UK/EU stock
Credit available
Expert pre-sales advice
Contact usOld Man Emu Torsion Bars can give your vehicle a new lease of life. Torsion bars become brittle over years of use and can eventually crack; Old Man Emu torsion bars are designed for tough conditions and long life.
Model: Isuzu D-Max 2002-12
Length (mm): 1142
Quantity: Supplied as a pair
Notes: Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important – a minimum of 60mm droop must be maintained. It has been found, due to vehicle manufacturing tolerances, that in some cases front shock absorbers may contact the steering arm when on full lock. Fitter should check for this and where required a small indentation should be made to the body of the shock absorber. 303012 torsion bars have a lighter rate than OE and improve ride comfort for vehicles with no front accessory weight. Due to their heavy rate, the OE torsion bars are suitable for vehicles with front accessory weight. Also fits 2008-11 Colorado RC and 2003-11 Rodeo RA models.
OME Torsion Bars are designed and set for optimum ride performance, while maintaining maximum wheel travel crucial to off-road action. Our torsion bars work best when Old Man Emu coil or leaf springs are fitted to the rear of your vehicle, with bars and springs then carefully matched to our premium range of four wheel drive shock absorbers. Together, they will transform your suspension performance.
We offer a complete suspension range for this model, ask for further details if needed.
- Manufactured from premium grade spring steel
- Powder coated to protect against corrosion
- Precision drawn, dropped forged ends for optimal strength and integrity
- Pressure rolled splines for precise fitment and increased spline durability
- Hardened and tempered to exact specifications for improved performance
- Preset and hardened to prevent sagging and increase life cycle
“Will Old Man Emu torsion bars fit directly onto my vehicle?”
Yes, OME torsion bars have the same dimensions and spline count as the factory parts and will fit straight onto the vehicle using your existing hardware.
“Are OME torsion bars an upgrade part?”
Yes, OME torsion bars are formed from premium grade steel and are stronger than most original parts. They are suitable for additional permanent weight, such as bull bars or engine swaps.
“Is this product durable?”
Yes, this is highly durable and long-lasting. All OME suspension is fully tested both on and off-road.
“Is correct adjustment important?”
Yes, it is important to correctly adjust your torsion bars and not over-adjust them.
“Can you supply a complete suspension kit for my vehicle?”
Yes, see our other products for details.
This item ships for free within the UK. Shipping charges may apply to other locations.
