Rock Flares Wide Wheel Arches Ford Ranger T6 PX PX2 PX3 2011-22 Smooth Look
from £395.00 inc VAT
Earn 1 loyalty point per £1 spent!
Rock Flares Wide Wheel Arches Ford Ranger T6 PX PX2 PX3 2011-22 Smooth Look
Free UK ShippingWe do not ship this product to your location
from £395.00 inc VAT
Earn 1 loyalty point per £1 spent! Find out more about our loyalty schemePrecision manufactured, tough ABS fender flares from a leading American brand.
Brand: Rock Flares (click for brand info)
Availability: Usually in UK stock
Credit available
Expert pre-sales advice
Contact usRock Flares build tough, high grade ABS vehicle protection products for pickup trucks and 4WD vehicles. Unlike most wheel arch kits, Rock Flares are neither bolt-on or stick-on; so there is no need to drill the vehicle body and no double-sided tape to fail over time. Instead, Rock Flares are designed to attach underneath the wheel arch lip, just like the vehicle manufacturer original equipment parts.
Vehicle Model: Ford Ranger T6 PX PX2 PX3 – 2011-22 (double cab, single cab and extra cab models)
Finish: Matte black, smooth finish
Width: 50mm approx from vehicle body
Paintable: Yes
Bolts Supplied: No – smooth-look kit
Notes: Rubber seals and fitting screws are included. Some models may require minor drilling under the arch lip for installation. Does not suit models with Park Assist sensor in front wheel arch.
Most wheel arch kits are either stick-on (usually this applies to the cheaper, low quality kits) or bolt-on, which requires drilling holes into the vehicle body. Rock Flares have developed high-quality ABS kits for modern 4×4 models and pickup trucks which attach with screws underneath the wheel arch lip. This gives a securely mounted kit, with a sturdy rubber seal giving a neat finish against the vehicle body. Some off-road users might prefer to drill-fit the arches to the vehicle body panels, but this is not necessary for a secure and long-lasting fit.
Rock Flares products are precision formed from high-grade ABS material. Unlike some cheaper kits, Rock Flares are UV-stable and will not fade or crack due to sunlight exposure. This kit is designed for vehicles with original factory bumpers fitted, although modification may be possible to suit some bull bars or aftermarket bumpers. Rock Flares are CAD designed for a precision fit.
Matching Rock Flares body cladding sets are available, these kits suit double cab models only. Body cladding is self-advesive, the area must be properly cleaned with isopropyl alcohol or similar before fitting.
- High-grade, UV-stable ABS material
- CAD-designed for a precise fit
- Easy installation with supplied fitting hardware
- 2-year guarantee for peace of mind
- Long-lasting protection
“Is this a stick-on or bolt-on kit?”
This is neither a stick-on nor bolt-on kit. Stick-on wheel arches have a habit of peeling off after a few weeks, sometimes at high speeds, which can cause them to hit another car or break up in the road. Bolt-on kits require drilling of the vehicle body to permanently mount the kit. Rock flares kits have a rubber gasket where the arch section meets the vehicle body, but this is made of rubber and not double-sided tape.
“Is drilling required?”
Drilling into the vehicle body is not required. Usually, Rock Flares use the vehicle’s existing mounting points under the arch liner, but sometimes minor additional drilling is required for a perfect fit. Screws and clips are supplied.
“Will this product stay looking good?”
Rock Flares are made from premium grade ABS material, which does not fade or dry out and will not go brittle in the sun. Cheaper kits will often look chalky after a while as the material dries out due to UV exposure.
“Is trimming required?”
Trimming is not normally needed, but in rare cases this could be required for a perfect fit.
“Can you supply body cladding for my vehicle?”
Yes, see our other products for details.
This item ships for free within the UK. We do not normally ship this product outside of the UK.
