Codebreaker 4 Mode OBD2 Computer Multifunction Code Scan Tool
£99.00 inc VAT
Earn 1 loyalty point per £1 spent!
Codebreaker 4 Mode OBD2 Computer Multifunction Code Scan Tool
We do not ship this product to your location
£99.00 inc VAT
Earn 1 loyalty point per £1 spent!
Find out more about our loyalty schemeHack it like a mechanic with the dash-mounted Codebreaker.
Brand: Codebreaker (click for brand info)
Availability: Usually in UK/EU Stock
Free UK Shipping
Credit available
Expert pre-sales advice
Contact usRead and clear your own fault codes like a pro with this clever device. 4 different modes with a wealth of useful features.
Model: Works with all OBD2/EOBD compliant vehicles
Read and clear DTC codes: Yes
Notes: Works with all OBD2/EOBD compliant vehicles. Compatible with Data Link Connector (DLC) only.
Modern vehicles are complex, with many sensors and inaccessible components. Most vehicles just have a single Malfunction Indicator Light (aka the ‘Check Engine’ light), which illuminates to warn of faults and system failures. When the check engine light comes on, a trip to your local garage or main dealer can be needed to diagnose and repair the problem. This diagnosis is expensive to the vehicle owner but simple for the garage to perform.
Up until now, many home scan tools have been very limited in their range of features and often vehicle make or model specific. This is why Codebreaker was born.
Codebreaker enables you to quickly diagnose your own faults and to determine the cause of check engine lights. Information is read and analysed in real time, using a professional codes analysis database. The light can then be reset, along with all monitors. We think that every vehicle owner should have one of these useful and money-saving devices.
The 4-Mode OBD2 Computer can be mounted anywhere on the vehicle dashboard in just minutes. Connecting directly to your vehicles OBD2 system via the Data Link Connector (DLC) located under your dash, this device is easy to install and capable of monitoring engine performance and fuel economy. Featuring 4 modes, this tool allows you to further investigate the inner workings of your vehicles Engine Control Unit (ECU).
Scan Tool
Troubleshoot engine fault codes on OBD2/EOBD compliant vehicles (most vehicles manufactured since 2006).
- Read & clear trouble codes
- Easily determine the cause of Check Engine/Malfunction Indicator Light (MIL)
- Turns off Check Engine light and resets monitors
- View freeze Frame data to determine the cause of fault codes
- Displays monitor and I/M readiness status
- Retrieves vehicle information – VIN, CIN, CVN
Digital Gauges
Measure & Monitor 4 different sets of real-time engine data simultaneously.
- Fuel system status
- Vehicle speed
- Engine coolant temperature
- Fuel rail pressure
- Intake manifold absolute pressure
- Engine RPM
- Calculated engine load value
- Ignition timing
- Intake air pressure
- Absolute throttle position
- Battery voltage
- Short term fuel trim
- Oxygen sensor output voltage
- Airflow rate
- Commanded secondary air status
Trip Computer
Display useful information to help manage fuel consumption such as Kilometers per Litre (KPL), fuel range, trip time, etc.
- Maximum speed
- Average speed
- Driving time
- Driving distance
- Fuel used
- Trip fuel economy
- Distance to empty
- Time to empty
- Fuel to empty
- Engine power
Data Memory
The 4-Mode OBD2 Computer saves up to 300 hours of driving data, allowing retrieval of information from each trip.
- Time and date of each trip
- Distance travelled for each trip
- Maximum speed during each trip
- Time over speed
- Number of times of extreme acceleration during each trip
- Number of times of extreme deceleration during each trip
- Number of hard acceleration and braking
- Average speed
- Average fuel consumption
Kit Includes
- 4-Mode OBD2 Computer
- Velcro mounting strips
- OBD2 DLC connector cable
- USB cable
- User guide
- Works with all OBD2/EOBD compliant vehicles
- Reads and clears Diagnostic Trouble Codes (DTCs)
- Easily determines the cause of the Check Engine/Malfunction Indicator Light (MIL)
- Turns off Check Engine light & resets all monitors
- Views freeze frame data
- Displays monitor and I/M readiness status
- Retrieves Vehicle Identification Number (VIN)
- Includes professional codes analysis database
- Clearly displays data in real-time
Specifications
- Display: Back-lit, 2 lines x 16 character display
- Operating Temp: -10°C to 70°C (14°F to 158°F)
- Storage Temp: -20°C to 70°C (-4°F to 158°F)
- Power: 8 to 18 volts provided via vehicle power
- Measures 126mm x 41.6mm x 26.6mm
- Net Weight: 0.30kg (0.60lb)
- Gross Weight: 0.35kg
“Will this device work with my vehicle?”
Yes, as long as the vehicle is OBD2/EOBD compliant and has a standard DLC port. This applies to most modern 4×4 models and passenger cars.
“Can I transfer the Codebreaker between vehicles?”
Yes, this can be used on different vehicles and does not need resetting.
“Will this give me the same level of information as my local garage might have?”
The Codebreaker reads and decodes all standard fault codes. This gives a sufficient level of data for most users.
“Would this device allow me to diagnose and potentially repair a fault without needing to go to a garage?”
Yes, this is often the case.
“Can I use the Codebreaker to turn off the Check Engine light?”
Yes, the Codebreaker will allow you to read and then reset the Check Engine light. Of course, if there is a persistent fault, the light will illuminate when detected until the fault is fixed.
This item ships for free within the UK. Shipping charges may apply to other locations.
