Agile Offroad Performance Big Brake Kit Mercedes-Benz Sprinter W907 Series 3 2018-on Alcon Rotors Calipers Pads Front Rear

Agile Offroad brake conversion kits are engineered in conjunction with US-based motorsport experts Alcon to improve braking and reduce stopping distance in all conditions. This kit contains everything you need to fully upgrade your factory brakes.

Model: Mercedes-Benz Sprinter W907 Series 3 2018-on
Complete Kit: Yes
Front Kit Spec: 6-piston calipers, 340mm 2-piece rotors
Rear Kit Spec: 4-piston calipers, 350mm 2-piece rotors
Kit Contents: Ductile iron calipers, rotor kit, brake pad set, stainless steel brake lines, wheel studs, splined lug nuts with key
Fitting Instructions: Click Here
Notes: Fits single rear wheel models with 6x130mm bolt pattern. Does not fit dual rear wheel models or 6x205mm bolt pattern. 16 inch or larger wheels are required (17 inch or larger for 2023 models and after). The rear calipers are not compatible with electronic parking brakes, although the front-only kit can be fitted to models with this feature. This kit is compatible with 2WD and 4WD models and also 2023-on AWD models.

When you are heading into extreme terrain, you leave nothing to chance. Standard factory braking systems often cannot cope well with additional weight and struggle with overheating and brake fade when the going gets tough. Now that you have added all your aftermarket gear or completed your motorhome build, there is one problem; the weight of all that extra gear can put a massive strain on braking performance. The more serious your adventure, the more you need a serious braking solution. This is where Agile Offroad comes in.

Agile Offroad offer complete uprated brake solutions are designed to perform superbly even in the harshest conditions. From high rocks to desert washes, these extensively tested brake systems will battle through the toughest challenges without sacrificing performance. Plus, each kit has been custom designed to be compatible with OE master cylinders and fit behind most 16 inch and larger aftermarket off-road wheels.

High temperature, motorsport-spec components are used throughout, from ductile iron caliper housings for maximum stiffness and high impact resistance to oversized pad contact areas, high-torque rotors and corrosion-resistant acid zinc finishes with epoxy acrylic paint. This kit can provide up to a 6 percent reduction in pedal effort and a 3 percent reduction in disc temperature, for reliable braking and long component life, along with a massive 45 percent reduction in pad work rate. Agile Offroad understand the Sprinter better than just about any company on the planet and now their products are available to buy from 4×4 Works in the UK, along with full warranty and spare parts support should you ever need it.

• High strength caliper design
• High friction pads
• High torque rotors
• Durable surface finishes
• Suits most OEM wheels
• Motorsport-spec seals
• Increased pad contact area