Front Runner Jeep Wrangler 4xe (2021-Current) Extreme Slimline II Roof Rack Kit

Front Runner are legendary worldwide for their extensive range of professional grade roof racks, bed racks, load bars and accessories. An extensive range of clever and innovative add-ons are available for leisure, camping, off-road and motorhome users. Front Runner racks are designed to withstand the rigours of off-road use and overland travel.

The Jeep Wrangler 4xe Extreme mounting system bolts to existing mounting points on the chassis and roll cage. This unobtrusive, high performance, nearly indestructible mounting solution allows you to quickly remove the Freedom Panels with the rack in place. The windscreen can also be lowered without any interference. The cargo weight is evenly distributed across the roll bars and body of the jeep, placing zero weight on the hard top itself.

All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.

These Foot Rails allow for a Front Runner under rack mount table (1 smaller prep table or 1 larger camp size table) to be fitted.

All Front Runner Racks are backed by a Limited Lifetime Warranty*

For further information on installation, please see the fitment instructions in the INSTALL tab.

*Suitable for most Raised Air Intakes / Snorkels fitments. Confirm fitment with Air Intake / Snorkel fitment guide.

Note: This Kit is not Suitable for the Mojave Edition and cannot be used together with the soft top roof or Sky One-Touch Power top.

* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

KRJW039T – Jeep Wrangler 4xe (2021-Current) Extreme Slimline II Roof Rack Kit Consisting of: 1x FAJL002 – Jeep Wrangler JL (2018-Curr) Foot Rails1x FAJL003 – Jeep Wrangler JL (2018-Curr) Inner Brackets1x FAJL008 – Jeep Wrangler JL/4xe(18-Curr)Front Bar RRack Mount1x RRSTJ12 – SLII Tray – 1425mm(W)X2368mm(L) Material Used: Black epoxy powder – coated T6 aluminium High strength steel Approximate Installed Weight: 45.64kg (100.62lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2”) to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2”) to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2”) to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 445mm (18”) Length: 1720mm (68”) Height: 410mm (16”) Shipping Weight: Weight: 53kg (117lbs)