Old Man Emu OME MT64 Monotube Suspension Lift Kit Toyota Hilux Series 8 2015-on

Old Man Emu suspension kits are Australian engineered and have been sold worldwide for more than 30 years. This premium kit offers a great solution for on and off road use, with flexible options for varying amounts of weight.

Model: Toyota Hilux Series 8 2015-on
Years Covered: 2015 – 2016 – 2017 – 2018 – 2019 – 2020 – 2021 – 2022
Estimated Lift (front/rear): 40mm
Notes: To maintain coil clearance from the sway bar, the coil seat must be installed with the helix facing away from the sway bar. Strut Top Hat Kit may be required if original equipment is worn. OME Upper Control Arm will provide an increase between +2.5 and +3.5 degress of caster and upto 1.5 degrees of negative camber increase (figures based on an approximate 50mm lift). Please note after fittment a wheel alingment will be required. Fit kit part number VM80010056 is required for fitments when using the 0mm or -5mm groove to stop fouling of the sway bar. MT64 dampers do not suit OE coil springs. The Halogen Headlamp Levelling Bracket is a mandatory fitment for models with halogen headlamps only. Leaf Spring front eye bolt 6151539 required for fuel tank side.

Technical Information
Choosing the right suspension: Click Here

Whether you are travelling on-road, using your vehicle for green laning or competition purposes, or towing a caravan or trailer, the importance of a fully integrated 4×4 suspension system is paramount. Often, factory suspension setups cannot cope with extended heavy use and over time your springs can corrode or begin to sag. Shock absorbers can also become degraded or start to leak. Handling and load carrying can then suffer and eventually, if not replaced, components can fail. This could render the vehicle un-roadworthy and may even leave you stranded or cause an accident.

Old Man Emu MT64 suspension upgrades are designed for superior performance across all terrain, providing noticeable improvements to vehicle performance, increased load carrying capacity and control characteristics. These high-grade kits feature large diameter monotube shocks and every single component is developed and tested in-house by dedicated suspension engineers.

Get your vehicle ready for adventure with the most important upgrade of all – a premium suspension kit.

MT64 Monotube High Performance Kit

Old Man Emu have developed a high performance suspension solution for this vehicle model: MT64 Monotube. This upgrade is the outcome of a long development process aimed at delivering a high performance monotube damper for overland use and heavily laden vehicles. Unlike most standard shock absorbers, MT64 features a single heavy-duty tube design with a large 64mm diameter. The increased capacity allows the shock absorber to run cooler for longer, even in the most punishing conditions.

The MT64 front struts have a unique adjustable design, which allows for simple height adjustment of +/- 15mm in 5mm increments, so you can adjust your front-end ride height to suit the weight of accessories such as bumpers and winches – now or in the future. This premium upgrade is designed for the driver who demands a high performance and high durability suspension package, regardless of terrain.

Selecting the right kit for your vehicle weight and usage is very important. Most standard vehicles, without extra permanent weight, will benefit most from a medium-rate setup. Some kits are given a weight rating in kg, this applies to permanent front or rear accessory weight such as steel bumpers, winches, etc. Other kits are rated for "bull bar", "bar and winch" and so on; this refers to full-weight protection bumpers and bull bars.

4×4 Works are authorised and trained by Old Man Emu. We have skilled and award-winning suspension engineers available to answer any questions and help you choose the right setup.