Old Man Emu OME Suspension Lift Kit Toyota Land Cruiser 70 73 74 Series 1984-98

Old Man Emu suspension kits are Australian engineered and have been sold worldwide for more than 30 years. This premium kit offers a great solution for on and off road use, with flexible options for varying amounts of weight.

Model: Toyota Land Cruiser 70 73 74 Series 1984-98
Years Covered: 1984 – 1985 – 1986 – 1987 – 1988 – 1989 – 1990 – 1991 – 1992 – 1993 – 1994 – 1995 – 1996 – 1997 – 1998
Estimated Lift (front/rear): 50mm
Notes: Vehicles with no front accessory weight will require the removal of the 4th leaf from the top of the spring stack; this is to maintain good shackle angle by not allowing the bump stop measurement to exceed 100mm. If rear bump stop measurement exceeds 150-160mm, remove 3rd leaf from top of spring stack to prevent shock absorber from topping out. OME Anti Inversion Kits are MANDATORY front and rear if OME Greasable Shackles are not fitted. OMECW2 Caster Wedges (available separately) may be required to restore positive caster angle; front end alignment check will indicate required adjustment. Check if you have 50mm or 51mm spigot size before ordering OME Greasable Pin Kits as 2 sizes are available.

Technical Information
Choosing the right suspension: Click Here

Whether you are travelling on-road, using your vehicle for green laning or competition purposes, or towing a caravan or trailer, the importance of a fully integrated 4×4 suspension system is paramount. Often, factory suspension setups cannot cope with extended heavy use and over time your springs can corrode or begin to sag. Shock absorbers can also become degraded or start to leak. Handling and load carrying can then suffer and eventually, if not replaced, components can fail. This could render the vehicle un-roadworthy and may even leave you stranded or cause an accident.

Old Man Emu suspension upgrades are designed for superior performance across all terrain, providing noticeable improvements to vehicle performance, increased load carrying capacity and control characteristics. These are high-grade kits with worldwide warranty support and every single component is developed and tested in-house by dedicated suspension engineers.

Get your vehicle ready for adventure with the most important upgrade of all – a premium suspension kit.

Selecting the right kit for your vehicle weight and usage is very important. Most standard vehicles, without extra permanent weight, will benefit most from a medium-rate setup. Some kits are given a weight rating in kg, this applies to permanent front or rear accessory weight such as steel bumpers, winches, etc. Other kits are rated for "bull bar", "bar and winch" and so on; this refers to full-weight protection bumpers and bull bars.

4×4 Works are authorised and trained by Old Man Emu. We have skilled and award-winning suspension engineers available to answer any questions and help you choose the right setup.