Old Man Emu OME Upper Control Arms Toyota Hilux Series 7 and 8 2005-on OME
£549.00 inc VAT
Earn 1 loyalty point per £1 spent!
Old Man Emu OME Upper Control Arms Toyota Hilux Series 7 and 8 2005-on OME
We now ship this product to Canada and USA - £49 flat rate shipping charged at checkout...
£549.00 inc VAT
Earn 1 loyalty point per £1 spent!
Find out more about our loyalty schemeTough and durable upper control arms from the world famous off-road brand.
Brand: Old Man Emu (click for brand info)
Availability: Usually in UK/EU Stock
Free UK Shipping
Credit available
Expert pre-sales advice
Contact usOld Man Emu Upper Control Arms are developed to withstand the rigours of on and off road use. Regain your camber and caster adjustment.
Model: Toyota Hilux Series 7 and 8 – 2005-on
Years Covered: 2005 – 2006 – 2007 – 2008 – 2009 – 2010 – 2011 – 2012 – 2013 – 2014 – 2015 – 2016 – 2017 – 2018 – 2019 – 2020 – 2021 – 2022 – 2023 – 2024 – 2025
Intended Lift Height: 40mm approx
Kit Contents: LH and RH upper control arms, Ball joint caps and bolts, Mounting washers
Notes: Fitting instructions and alignment specifications are included
When an Independent Front Suspension (IFS) vehicle is fitted with a suspension lift, the caster and camber can be pushed outside the factory specifications. IFS vehicles generally have just a few degrees of adjustment in their camber and caster from the factory.
Adding Old Man Emu upper control arms brings the alignment cams back into an acceptable range for both caster and camber.
After fitment of Old Man Emu Upper Control Arms, a wheel alignment check is required. If the vehicle is fitted with aftermarket wheels or tyres, clearance should also be checked. Additional caster may be required if the tyres or wheels do not clear.
Wheel alignment information is included in the fitting instructions supplied with the kit. The OME Upper Control Arm will provide an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures based on an approximate 50mm or 2 inch lift).
- Forged ball joint housing
- Forged eyelets
- Heavy duty greasable ball joint
- OME ball joint protective cap
- Giro bushings – free-pivoting and maintenance-free
- Increased camber and caster for 50mm lifts
- Mounting provision for OE ABS wires (where required)
- Durable powder coat finish
“How are Old Man Emu control arms different from standard OE parts?”
They are physically different in several ways. The lengths and angles are changed, the ball joints are uprated and the design and materials used allow the arms to be stiffer and more durable.
“Why would I need to replace my control arms?”
For every 25mm of additional lift height, your vehicle will lose around 1 degree of caster. Many modern vehicles have about 2 degrees of caster adjustment available for wheel alignment, so adding a 2 inch lift means that you no longer have the means to properly adjust wheel alignment as needed. Fitting OME upper control arms allows for proper adjustment by restoring factory settings.
“Is this product suitable for standard height vehicles?”
No, OME upper control arms are intended for vehicles with the amount of lift stated on the product page. They will work perfectly with OME suspension kits, or other kits which offer a similar amount of lift.
“Are OME control arms adjustable or fixed?”
OME control arms have a fixed ball joint, they are not adjustable.
“Can you supply a suitable suspension package for my vehicle?”
Yes, see our other products or contact us for details.
This item ships for free within the UK. Shipping charges may apply to other locations.
