SuperPro Upper Control Arms Ford Ranger T6 PX PX2 PX3 2011-22

SuperPro Upper Control Arms allow for additional camber and caster, for accurate alignment and improved articulation on lifted vehicles.

Model: Ford Ranger T6 PX PX2 PX3 2011-22
Kit Contents: 2x control arms, 2x ball joints
Bushes Included: Yes
Notes: Adjustable ball joint gives +/- 2° of camber & 0 to +4 caster

If you lift your 4WD, you may then need an alignment correction solution to fix the geometry change in your suspension. This can be achieved with an alignment correction bushing kit or a SuperPro Adjustable Upper Control Arm Kit. In some cases the bushings alone aren’t able to correct the alignment issues, such as droop. This is when an Upper Control Arm Kit is the better solution, particularly in your lifted IFS 4WD. Generally, IFS vehicles have a few degrees of adjustment in their camber and caster from factory. When you lift your vehicle, for every inch of lift you will lose a degree of adjustment. This means that if you lift your 4WD and then go to get a wheel alignment there will not be enough adjustment to accurately align your vehicle. The solution: adding an adjustable upper control arm, this allows the vehicle to get back the lost degrees of adjustment and for an accurate alignment.

SuperPro 4×4 Upper Control Arms are designed, tested and manufactured in Australia. These arms are built to the highest standard, designed to outperform the competition and the Original Equipment (OE) parts. Offering both complete repair and upgrade upper control arm kits, SuperPro provide complete kits with pre-installed SuperPro bushings and all other necessary components needed for an easy installation.

• Increased articulation – ideal for off road use
• Camber and caster adjustment
• Increased clearance between spring and control arm at full articulation
• Fitted with durable and long-lasting SuperPro bushes