Trail-Gear IFS Eliminator Kit Toyota Surf 4Runner N60 Series 1 1983-89 Delete Kit
£4,895.00 inc VAT
Trail-Gear IFS Eliminator Kit Toyota Surf 4Runner N60 Series 1 1983-89 Delete Kit
£4,895.00 inc VAT
Find out more about our loyalty schemeIFS delete kit from the specialist US off-road brand.
Brand: Trail-Gear (click for brand info)
Availability: Usually 3 weeks approx.
Credit available
Expert pre-sales advice
Contact usTrail-Gear are one of the leading US designers and builders of specialist conversion kits. Build your truck the way you want it.
Model: Toyota Surf 4Runner N60 Series 1 – 1983-89
Years Covered: 1983 – 1984 – 1985 – 1986 – 1987 – 1988 – 1989
Lift Height: Choice of 3″, 4″ or 5″
Axle: Front axle kit
Notes: On V6 installations, Trail-Gear recommend moving the front hanger forward by about 18mm. This allows the tie rod to clear the stock 4WD oil pan and also kicks the shackles forward slightly helping the springs to carry the heavier load of the V6 motor. This kit was designed for 4WD models, modification may be needed if fitting to 2WD models.
Kit Contents
- Front Leaf Springs (your choice 3″ 4″ or 5″)
- High Steer Crossover Steering Kit
- Front Drop Hanger with Greasable Bolts
- Greasable 5″ Shackles
- Frame Tubes and Jigs
- Steering Stabiliser Kit
- U bolt Flip Kit
- Shock Hoops (2)
- Bilstein Shocks (2)
- Front Brake Lines (2)
- Vented Rotors (2)
- Bumpstop Extensions (2)
- Wheel Spacers (2)
- Bump Stops (2)
- Front Axle Gusset
- Axle Diff Armour
- Knuckle Service Kit
- Wheel Bearing Kit (2)
- Motor Mount Cover Plates
- Spring Pad
Vehicle models with IFS suspension can sometimes consist of torsion bars rather than leaf or coil springs. Whilst torsion bar suspension can offer good ride quality, this configuration is not as durable or capable off road and also gives limited scope for lifting the vehicle. One answer to this problem is to delete the IFS components and convert the vehicle to a live axle, leaf spring suspension setup at the front end.
Trail-Gear are a long established and highly regarded US specialist, with decades of experience in improving 4WD models. The Trail-Gear IFS Eliminator kit contains almost everything needed to carry out the conversion, and comes with a range of lift height options. With a choice of 3″, 4″ or 5″ front lift, plus the option of either medium rate or heavy duty front leaf springs to suit additional weight such as bull bars or winches, this is a versatile and high quality kit.
To fit this kit, you will need to source a suitable live axle and long spline driveshaft from a 1979 to 1997 Hilux or Surf/4Runner. This kit only contains front axle components, so you will also need to lift the rear of the vehicle to match the front ride height.
- Complete Kit (excluding axle etc)
- Choice of ride height
- USA developed and tested
- Tried and tested IFS delete kit
- Instructions included
- 12 month warranty
“Will this bolt straight onto my vehicle?”
No, this is a custom fit product and modification will be required.
“Will I need to source a front axle?”
Yes you will. This can be from a 1979 to 1997 Hilux, 4Runner or Surf model. You will also need a long spline driveshaft.
“Is this product suitable for off-road use?”
Yes, this is a heavy duty kit and is designed for both on and off road use.
“Are all kit components high quality?”
Yes, everything is very high quality and intended for a durable and long-lasting build.
“Is welding required?”
Yes, welding is required to install the kit.
This item ships for free within the UK. Shipping charges may apply to other locations.